FlooringCorner.Com, Considered to be your final stop to all your flooring needs.. Weather you are looking for some information on how to simply clean and give the best of care to your floors to also all the information you might be looking to Install your floors by your self without not Professional help, we have come this far just to make every easier for you..

Make sure you do understand that Your Flooring Needs, is our motive to continue supplying great work and efforts, to you and everyone else.

http://www.flooringcorner.com Is a Website that is designed, edited not only by a WEBMASTER, but also by a few of the Best Flooring preofessionals out there, whom have the largest experience dealing with floors, working and installing them, they will soon be avaible for Live questions and support, for all homeowners Nation and World Wide.


.  Check back with us Often,we have been working really hard and none stop to set this Site UP and Running, so you could already start to get the feeling on how things would be working around here.

If you have any questions on comments at this momment, you may feel free to use the contact option to your left as of now.. but soon we will have a better and more specific contact page.

History

Here i will follow up with a nice little flooing history, which i recommend everyone reading it.

The first rubber floor tiles debuted sometime in the 12th to 13th centuries, but declined in popularity toward the end of the 17th century. The use of plain, square, undecorated red clay tiles became common throughout Europe during the 18th century. Linoleum was invented and patented in 1845. It was first manufactured in Scotland in the 1860s, and the first U.S. plant was built in 1872.

Linoleum remained popular until after World War II, when easy-to-maintain and durable vinyl flooring was introduced.

In 1894, Philadelphia architect Frank Fumess patented a system for rubber floor tiles. Colors were limited, but the tiles could be laid in geometric patterns to produce an eye-catching design. By the end of the century, recessed tabs allowed rubber tiles to be nailed to the sub-floor, and soon the tabs were eliminated altogether. These tiles were durable, sound-deadening, easy to clean, and easy to install. However, they also stained easily and deteriorated over time from exposure to oxygen, ozone and solvents, and were not suitable for use in basements where alkaline moisture was present.

The first cork tile floor was introduced in 1904, and became the most popular type of resilient flooring in the 1920s. It was available in a limited range of colors and designs, but was expensive and porous.

Asphalt tile arrived on the scene in the 1920s, and by the 1950s, was the most widely used floor tile on the market, fueled by low initial cost and easy installation. These tiles were tough, durable, highly resistant to abrasion and moisture, and fire resistant, but the styles and patterns were limited.

In 1933, vinyl made its big splash when a vinyl composition tile was displayed at the Century of Progress Exposition in Chicago. Because of the scarcity of vinyl during the war years, vinyl flooring was not widely marketed until the late 1940s, but then quickly challenged its competitors. Originally used only in high traffic areas, vinyl flooring eventually became the most popular choice for flooring in just about any hard-surface application.

In the 1950s demand for resilient flooring grew due to its superior performance characteristics when compared to other flooring alternatives. During the 1960s cushioned vinyl floors and "no-wax" resilient floors were introduced to provide underfoot comfort and ease of maintenance. During the last twenty years specialty resilient floors which provide enhanced slip resistance and static conductivity have been developed to meet the needs of the marketplace.

Today, resilient flooring is second only to carpet in floor covering sales in the United States. Resilient flooring continues to be a popular choice in almost any application because it is durable, easy to maintain, available in many different colors and patterns and is easy to install.

From: http://www.rfci.com/int_ARF-History.htm